Nova 1624-44 Swivel Head Lathe with Chucks, 16 Turning Tools and More.

Nova 1624-44 on the factory cast stand, lightly used and stored in a heated indoor shop. Serial 008174. Everything below goes together. Set up the lathe and start turning bowls or spindles the same day.

THE LATHE 1.5 hp, 110V 16" swing over the bed, 24" between centers Swivel head locks at 0, 22.5, 45 and 90 degrees for outboard work (29" outboard with the optional outrigger, not included) 8 belt speeds, 214 to 3600 RPM 1-1/4" x 8 TPI spindle, 2MT headstock and tailstock 24-position spindle index Runs smooth on every speed. Original manual included.

Heads up: this is a belt-change lathe, not electronic variable speed. You move a belt to change speeds.

WORKHOLDING Nova 4-jaw scroll chuck with T-handle key, faceplates, 16 Longworth-style reversing chuck, 2MT spur drive, live center and Jacobs drill chuck and tool rests

TOOLS 10 full-size HSS tools on a handmade wall rack: 8 WoodRiver tools. Bowl gouge, spindle gouges, roughing gouge, skew, parting tool and scrapers. WoodRiver 5-piece mini HSS set in the wooden case, good for pens and small spindles Easy Wood Tools bent carbide hollower with cutter pouch.

Pickup in Bismarck. The headstock is heavy, so bring a helper and a truck. Cash only.

No holds.