Letourneau model m carryall pull scraper, 7.5 yards heaped, full hydraulics, 10:00-20 tires, weighs 11,000 pounds empty, 7 foot cutting width, overall width of 8' 1", hydraulic push-off. These were originally made be be pulled with a caterpillar D-6. Before I converted this to hydraulics, I pulled it with a cable operated D-8 and then later with a Versatile 145 tractor, and on the last job I used it on I pulled it with a Ford-Versatile 946 which is a 325 horsepower tractor and weight of 24,000 pounds (weight is more important than horsepower). If you look close at the pictures, the first one would be loaded, second picture would be dumping and the third picture would be fully dumped. This uses two hydraulic circuits, one is for the bowl up and down; the other one is for the apron, and then once that raises all the way up it starts to push on the ejector (using a priority valve). This is ready to work unless you want to give it a Dupont overhaul (paint job). I'm now retired and I don't see any need in the future for me to keep this. When I went to different jobs I would pull it with my pickup but you make that decision. Asking $11,900 and it's located near Minot, North Dakota