Home > Gulby
Empty Profile Photo
Gulby
Coleharbor, ND

About

Gulby resides in Coleharbor, ND and has been with us for over 13 years.

Gulby's Listings

Gulby
2026-08-28 04:08:47-05
4 Photos
Delco Remy 42MT 11 tooth Starter from a Cat
I pulled this off a 3406E because I have extra gear reduction starters to swap with. It still worked great. The truck had 500k miles. The gear teeth
Semi Truck - Coleharbor, ND
$50
Gulby
2026-08-27 05:18:04-05
Eaton 9 speed transmission with overdrive
Rtx 14709hr. Good transmission. It has a rebuild tag on it. Truck was a 355 HP with 500k miles. I pulled from my truck after putting about 3,000 miles
Semi Truck - Coleharbor, ND
$1,000
Gulby
2026-08-22 04:27:57-05
Eaton DS402 and RS402 4:11 Ratio differentials
Housings have numerous cracks, spindles are getting worn, brakes will be removed. The rear axle has water damage, so all the bearing surfaces show
Semi Truck - Coleharbor, ND
$750
Gulby
2026-08-20 03:46:18-05
Chicago Grip Cable Tensioner
This might be a good fencing tool. Its called a Chicago Grip and its used for pulling tension on cables. The tighter you pull on the loop, the tighter the jaws squeeze
Livestock Equip. - Coleharbor, ND
$75
Gulby
2026-08-16 09:39:52-05
2 Photos
Antique Stanley Miter Saw
Excellent shape, still functional, teeth still cut okay, one leg is missing but its an easy fix. I have another one but its smaller that I'd sell also.
Antiques - Coleharbor, ND
$25
Gulby
2026-08-16 09:26:38-05
2 Photos
Anfinson's Power Hacksaw
Needs a motor, but otherwise appears to be in working order. Its almost 3 feet long and about 10 inches wide.
Tools - Coleharbor, ND
$15
Gulby
2026-08-14 02:56:59-05
2 Photos
Old drill bits with flat shank
3/16 inch up to 1 inch. I have no idea if they drill good. I dont have a chuck for these. $5 for all of them or trade for tools. Not including the tool box.
Tools - Coleharbor, ND
$5
Gulby
2026-08-13 08:28:10-05
3 Photos
60 inch small hole flattop Peterbilt Sleeper
1986 or 1987, will fit on a 359 or 379. Interior is mousy, so I gutted the insulation and fabric. Aluminum is in excellent shape. Minor dents and scratches
Semi Truck - Coleharbor, ND
$550
Gulby
2026-08-13 08:13:00-05
4 Photos
1980s 1990s Chevy truck tilt steering column
Seems to be in decent shape.
Parts & Accessories - Coleharbor, ND
$25
Gulby
2026-08-13 08:09:14-05
4 Photos
Chrysler Force Boat Motor parts
I got what I needed for our motor. These 2 motors still have lots of parts left. I have no idea on the condition of the remaining parts. These are probably from
Boats - Coleharbor, ND
$1
Gulby
2026-08-13 08:03:13-05
3 Photos
PTO driven wire fencing spooler
PTO driven wire fencing spoiler. Gears turn nicely by hand. Looks like it mounts to a 3 point hitch. The U-joints on the pto shaft feel good. Barb wire fence equipment tools tractor cattle hay
Livestock Equip. - Coleharbor, ND
$25
Gulby
2026-08-13 07:57:09-05
3 Photos
8 inch well drilling bits
2 drill bits, well used, some broken buttons. Decoration or recycling. I'm not sure what metal the buttons are made of. Very heavy, but one man can lift it. $25 per bit.
Oilfield - Coleharbor, ND
$25